< Previous Step |

Step 9:

Quality Assurance

Needless to say the design team is constantly assessing the jewelry after each stage of the manufacturing process. Since an immaculate design is absolutely necessary, quality assurance is continuously performed.

There are many small details that are not discussed in the manufacturing process. For example, if it is a fancy yellow stone that will be set, the bath is plated with 24-karat gold to maximize the intensity of the color of the stone (obviously, without touching the stone itself). If it is a fancy pink diamond used, a rose gold will be the metal of choice. However, since the jewelry designers always aim for perfection, each stone must be assessed indivdually.

Leibish & Co. uses only 100% natural fancy colored diamonds. The stones themselves are never enhanced or artificially colored in any way.

Quality Assurance

Chavi Itzhakov, Jewelry Design Department Manager, Assessing the Shank of a Ring

Quality Assurance

Chavi Itzhakov Assessing the Setting

Quality Assurance

Assessing the Look and Feel of a Fancy Colored Diamond Ring

Skip to any of the other steps in the manufacturing process of jewelry design

Polishing and Engraving
Both the Leibish & Co. company logo as well as the metal used to create the jewelry must be engraved into the piece. Whether it is 18-karat gold, 14-karat gold, or platinum medal used, the information must be engraved for authentication purposes. Read More »

Setting the Stones
Very carefully, the correct sized holes are drilled into the jewelry and the settings are created. Only after all diamonds, other than the center are set, do the jewelers begin working on the center stone. Read More »

Assembling the Jewelry
This process must be done very carefully and accurately as even the slightest miscalculation can result in a disproportionate piece of jewelry. Each section of jewelry is soldered together and finalized for a perfect piece of jewelry. Read More »

Casting the Model
The wax model is attached to a casting tree, where molds for each of the jewelry pieces are created. Each section of the jewelry is created separately so that every piece can be properly prepared for assembly. Read More »

< Previous Step |

Step 9: Quality Assurance

Step 9:

Quality Assurance